Car Systems - KS-1000 Stone chip protection
Description
∙ Sprayable stone chip and underbody protection
∙ Based on plastic rubber
∙ Free of asbestos
Area of application
∙ Underbody treatment for car bodies
∙ Stone chip protection for spoilers, sills and lower door areas
Benefits
∙ Vibration absorbing
∙ Anti-noise compound
∙ Also suitable for PVC substrates
Application advice
Overpaintable after application of an adhesion primer.
Product Data
Packaging:1000 ml container
Color: Black / grey / white
Specific weight: 1,02 kg/l
Solids by volume: ca. 30 - 32 %
Solids content: ca. 49 %
Shelf life: 24 months in closed original container at 20 °C
Handling : KS-1000 adheres to the following substrates: Iron, steel, galvanised steel, aluminium, primers, old coatings, paints and automotive plastics.
Surface preparation: The surfaces must be clean, free of grease and ideally sanded. For optimum corrosion protection, metals must be insulated with a suitable primer. Cover parts that are not to be treated (e.g. exhaust, brakes and springs).
Application:
Shake container well before use and apply at room temperature (15°C to 30 °C).
The drying time depends on the layer thickness and the ambient conditions.
700 µm wet film thickness requires approx. 2 hours to cure completely.
Overpainting:
When recoating with synthetic resin paints, the body protection must be completely dry.
If 2K paints, base coats or water-based paints are to be applied, CS Plastic Primer Spray must be pre-sprayed. Recoat
after the specified flash-off time / drying time.
