Eurol Fultrasyn 75W-90 is a fully synthetic, universal transmission/gear oil which can be used in both manual gearboxes as well as in final drives and where an API GL 3, 4 or 5 specification is required. By this, the oil offers excellent possibilities for reducing stock.
Eurol Fultrasyn 75W-90 is a fully synthetic oil and can be used in the complete drive line. The special additives in this product reduce fuel consumption and eliminate shifting problems.
Eurol Fultrasyn 75W-90 is fully compatible with synchromesh gearboxes and ensures easy shifting, even at very low temperatures.
Because of this unique formulation not only wear, but also corrosion and foam building are reduced to a minimum. At high temperatures, the oil is protected against thermal oxidation.
Eurol Fultrasyn 75W-90 shows excellent EP (Extreme Pressure) characteristics to cope with high loads and vibrations. Viscosity drop caused by high loads is minimal, so that the right viscosity is guaranteed, even at prolonged drain intervals.
API GL-4/5
API MT-1
MAN 342 type M3
MAN 341 Type E3
MB 235.8
ZF TE-ML 02B/05B/07A/12B/12/12N/16F/17B/19C/21B
DETROIT DIESEL DFS93K219.01
Arvin Meritor 076-N
Mack GO-J
| Density at 20°C | 0.8699 kg/l |
| Viscosity, kinematic at 100°C | 16.4 cSt |
| Viscosity, kinematic at 40°C | 95.8 cSt |
| Viscosity Index | 197 |
| Flash point | 200 °C |
| Freezing point | -51 °C |
IVECO
MIL-PRF-2105E
Volvo 97312
Scania STO 1:0
Renault (Note Technique B0032/2 Annex 3)
DAF
MAN 341 Type Z2
SAE J2360
